OmniTek OTR 1001, User Manual

Page: 193 / 390

OmniTek OTR 1001 User Guide, v3.1a K-9
Properties Control
Figure K-5: Surround Sound Audio PPM Properties.
Button Bar
Audio Input
The Audio Input option in the Properties control selects between the available audio inputs (see
Section K.1). The Button Bar Audio Input option cycles through the possible sources for the
display.
Meter Type
The Meter Type option in the Properties control selects between the Audio Meter version of the
PPMs display and the True Peak version. The Button Bar Meter Type option toggles between
these two options.
Loudness Scale
The Loudness Scale option selects the graticule used for Program Loudness meter shown to the
right of the Surround Sound display. For further information, see Section K.4 below.
Loudness Units
The Loudness Units option selects the units in which the Loudness target and the Program
loudness (shown below the Program Loudness meter) are expressed. Further information is given
in Section K.4.
Show Hold and Reset
These options control the display of Peak Hold lines in exactly the same way as on the Audio
PPMs display. In particular, the Button Bar
Show Hold option cycles through the three possible
settings for the Hold lines while the Reset option resets the calculation of the Peak Hold value.
Mute
The Button Bar Mute option refers to the sound level when the audio is played back (see
Section K.9).