OmniTek OTR 1001, User Manual

Page: 30 / 390

OmniTek OTR 1001 User Guide, v3.1 B-2
Button Description
Full & Multi
FULL Used in the View window to bring the currently-selected tile into full screen
display. Subsequent presses toggle between full screen display with and
without the associated status/button bar.
MULTI Reverts from full screen display of one tile to its parent multiple-tile display
(where this exists).
Tile Buttons . Note: The naming of these keys come from the category of display they select in
the View window.
WFM Waveform category displays
VECTOR Vectorscope category displays
PICT Picture category displays
AUDIO Audio category displays
GAMUT Gamut category displays
STATUS Status category displays
TIMING Timing category (Delay Measurement) displays
PHY Physical category (Eye/Jitter etc.) displays
Coloured Buttons:
White, Yellow
… to Black Act as soft keys, selecting the action/feature on the current Button Bar that is
topped with the matching colour.
Navigation Buttons
HOME Goes to top level of hierarchy / menu structure.
BACK Goes back up one level of hierarchy / menu structure. Also acts as Backspace
when entering text and as Close for menus/other subsidiary displays.
Other buttons:
OTHER Toggles the display of the Button Bar (see Section C.1)
PROPS Calls up the Properties control, which is used to set window/item properties
Knobs. Note: The detailed action of these knobs is context sensitive
GENERAL Twisted to cycle through options at same level in hierarchy. Pushed to select
items and to display the Button Bar (see below). Its current action is shown at
the top of the display.
HORIZ Twisted to adjust Horizontal parameters and to move cursors from left to
right across hierarchical listings. Pushed to switch e.g. between a pair of
cursors.
VERT Twisted to adjust Vertical parameters and to move cursors up and down
hierarchical listings. Pushed to switch e.g. between a pair of cursors.