manualshive.com logo in svg

OmniTek OTR 1001, User Manual

Share
Download
OmniTek OTR 1001 User Manual Download Page 252

O-2 

 

OmniTek OTR 1001 User Guide, v3.1 

O.2  Enabling and Disabling Simultaneous Monitoring 

Simultaneous  Monitoring is  enabled and disabled through an option on the System page of the 
Config window (see Section T.4). 

Control Panel 

Mouse & Keyboard 

To enable Simultaneous Monitoring: 

 

Tick 

Simultaneous monitoring

.  

View window tiles can then be individually set to display results from different inputs. 

To disable Simultaneous Monitoring: 

 

Clear 

Simultaneous monitoring

.  

Then selecting an input in one tile automatically switches all the tiles to that input. 

 

 

Figure O-2:

 Selection of Simultaneous Monitoring 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for OTR 1001







































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands