OmniTek OTR 1001, User Manual

Page: 188 / 390

OmniTek OTR 1001 User Guide, v3.1a K-4
Configuration Issues
The following Configuration settings affect how PPMs are displayed:
Channel Allocation
The stereo pairs displayed and the order in which these appear is set by editing the details for the
selected audio service on the
Audio Inputs page of the Config window (see Section T.6).
Gra Ballistics
The OTR supports a wide range of metering types, each with its own graticule and meter
ballistics. The type of meter that is imitated is selected on the
Audio Config page of the Config
window (see Section T.3).
Reference, Clip Level etc. Settings
The levels at which the bars of the displays are coloured red/yellow/green (as appropriate) are
determined by the Reference Level settings on the
Audio Config page of the Config window.
Other levels set on that page control when the bars become marked OVER etc. (see Section T.3)
Display Properties
Other aspects of how the audio PPMs are displayed are determined by the tile’s properties, a
complete read-out of which is given in the Properties control (Control Panel: press PROPS to
display). However, the Button Bar provides useful shortcuts (Control Panel: press GENERAL or
OTHER; Mouse/Keyboard: click on tile to display).
Properties Control
Figure K-3: Audio PPM Properties.
Button Bar