OmniTek OTR 1001, User Manual

Page: 62 / 390

OmniTek OTR 1001 User Guide, v3.1 C-10
Setting Tile Properties
The properties relating to the current range of tiles are listed in the section of the Properties
control starting at the heading ‘
Tiles
’, and can be changed by editing the details shown in the
Properties control.
However, the first place to look when you want to change some aspect of a tile is the Button Bar
because the Button Bar typically offers short-cuts to the most common settings associated with
the selected View. In particular, some Button Bar options directly switch controls on and off
(these options are given a copper-coloured highlight when the control is ‘On’). Other Button Bar
options cycle through the possible settings, while on an OTR 1001c, pressing and holding the
associated colour button calls up the Properties control with the focus already on the required
setting.
Control Panel Mouse & Keyboard
To set any property of a tile:
1. First check the options in the Button Bar.
(If the Button Bar isn’t shown, push the
GENERAL knob on the tile.)
2. If the Button Bar includes the required
property, take that option – otherwise press
the PROPS button and make the required
setting directly within the Properties
control.
1. First check the options in the Button Bar.
(If the Button Bar isn’t shown, click on the
tile.)
2. If the Button Bar includes the required
property, take that option – otherwise make
the required setting directly within the
Properties control.
Note: The properties listed in the Properties control reflect the current View window display. So
if the window currently shows one tile full screen, the Properties control will just show the
settings for that tile. What is displayed is also subject to the setting of the
Show all tiles option
listed at the top of the control. If this option is ticked, the settings of all the tiles currently on the
screen are displayed; if it isn’t ticked, information is just shown about the tile that currently has
the focus on it.