OmniTek OTR 1001, User Manual

Page: 380 / 390

OmniTek OTR 1001 User Guide, v3.1 I-16
Placing Table Headings on a Particular Line
The line of headings defined by the Description Label are placed by default on the line
corresponding to the start of the ANC packet. However, it could well be that the packet starts
with some data that isn’t part of this table. In that case, you may well want to place the line of
headings below this other data.
This can be achieved by using LabelOffset attribute of the PacketType statement to specify that
these Description Label should be placed a given number of screen lines below its default
position.
The following example of this layout being used is taken from the supplied
ANCHDTVAudioDef.xml file.
Example XML Statements
…
Example Result