OmniTek OTR 1001, User Manual

Page: 255 / 390

OmniTek OTR 1001 User Guide, v3.1 P-1
P : The Gen Window
Figure P-1: Example Gen Window.
The Gen window provides access to two features of the OTR 1001’s operation: image capture and
test signal generation. These features require either the GEN option or the GEN_BASIC option to
be added to the OTR.
This section introduces the Gen window and describes the basic capture and test signal
generation facilities that are offered when either GEN or GEN_BASIC is installed. The facilities
for creating test patterns that are offered when the GEN option is installed are described in
Section Q.
Note: The majority of the facilities described in this and the following two sections cannot be
used at the same time as the 3D analysis described in Section I. In particular, you will not be able
to generate test signals from any of the images or sequences displayed in the Gen window, which
are therefore shown greyed out while 3D analysis is selected.
Note for users of the PQA option (described in Section S): The Gen window is disabled when
using the OTR to carry out External/External quality assessments.
Selection
Control Panel Mouse & Keyboard
To display the Gen window:
Press the GEN button Click on Gen in the Top-Level Windows
toolbar