OmniTek OTR 1001, User Manual

Page: 346 / 390

OmniTek OTR 1001 User Guide, v3.1a T-20
Surround Sound interpretation
The display used to allocate to channels for surround sound display is similar to the one used for
the embedded audio. The main difference is that in this case, the channels are handled
individually rather than in pairs and separate selections are made for each of L, R, C, LFE, Ls
and Rs, together with Bsl and Bsr where 7.1 Surround Sound is to be analysed.
Figure T-11: Allocation of Stereo Pairs to the components of a Surround Sound display
Dolby decode (where installed)
Dolby data is delivered by a single channel pair so the display used to allocate channels for
Dolby decode comprises a single line.
Figure T-12: Selection of the stereo pair carrying Dolby data
When the display is called up, it will show either one pair ticked or highlighting over the last
selection to be made (if Dolby is currently selected on the other input). Ticking the required
stereo pair in this display automatically switches the Dolby decode facilities to the analyser
associated with the input for which the setting is being made.