OmniTek OTR 1001, User Manual

Page: 86 / 390

OmniTek OTR 1001 User Guide, v3.1a E-14
E.5 Gamut View
The Gamut View chiefly comprises a set of bar graphs showing the range of values for the
different possible colour components (YCbCr, RGB, Composite and XYZ where supported) in
the video currently being analysed.
Figure E-10: Example Gamut View display.
The individual graphs show the ranges encompassed by the current frame. Where the values go
outside the configured legal values, the values in excess are shown in red.
Displayed at the bottom of the Gamut display are details of the percentage of pixels in the
current frame for which the value goes outside the specified ranges, together with details of the
peak value of this percentage over the session since the last time the display was reset (e.g. using
the
Reset button on the Button Bar). Note: These values are also reset when the overall status is
reset (see Section E.6).
Selection
The Gamut View is a member of the GAMUT category. To select it:
Control Panel Mouse & Keyboard
To display the Gamut View:
Press the GAMUT tile button until the
Gamut View appears. Select GAMUT from the GAMUT section
of the View Tile Browser.
(For more detailed instructions, see Section E.1.)
Button Bar