![Okuma OSP-P200L Programming Manual Download Page 330](http://html1.mh-extra.com/html/okuma/osp-p200l/osp-p200l_programming-manual_3667818330.webp)
5238-E P-317
SECTION 13 SCHEDULE PROGRAMS
fs: Subprogram file name
LE33013R0301500020004
•
Entry of "fs" may be omitted when:
•
No subprogram call command is specified in a main program.
•
The subprogram called from a main program or subprogram exists in MD1:*.SSB (system
subprogram) or in MD1:*.MSB (manufacturer subprogram).
•
Required subprograms other that SSB and MSB are contained in the main program file. If
fs is specified, the device name and extension may be omitted. The defaults for the device
name and extension are "MD1" and "SUB", respectively. Therefore, if everything is
omitted, it is assumed that no file has been specified.
•
An alarm will occur if the total number of subprograms used exceeds 126.
•
An alarm will occur if "RTS" which means the end of a subprogram is not specified.
An alarm will occur if the file specified by "fs" does not exist.
n: Repetition count
LE33013R0301500020005
Q: Number of repetitions (specified by address)
The setting range is from 1 to 9999 and "1" is assumed to apply if entry of "n" is omitted. An alarm
will occur if a number outside the range 1 to 9999 is specified.
A space (" ") may be used instead of "=". "=" may be omitted if it is directly followed by a numeric
value.
Entries enclosed by [ ] may be omitted.
[
:] [
] [.
]
3 characters
Within 16 characters
3 characters
Device name
File name
Extension
Expression
=
Q