— 12-1 —
12. Command and Parameter
l
Connect Handy Terminal FHT11 to CN1 connector of the Driver Unit, then turn the power on. The
system is in normal state if “NSK MEGA---” message is returned.
l
Refer to “7. Handy Terminal Communication” for details.
12.1. List of Command and Parameter
l
Tables 12-1, 12-2, and 12-3 are the lists of commands and parameters.
l
Some parameters shown in the tables must be changed to unique values according to actual
condition from the shipping set.
l
Parameters parenthesized are properly set at the factory. If changing is necessary, contact your
local NSK representative.
*
: (Current Setting) Set unique value to your application. We recommend to write down
the set value for your future reference. You may need to refer to them when changing
the operating conditions or readjusting the system. For your convenience, a parameter
and program setting list is provided in Appendix 8 and 9 of this manual.
** : Setting differs with the Motor type and size.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
