— 9-40 —
9.3.3.2. Store Parameters of ESA Driver Unit
1)
Start HyperTerminal.
2)
Set MM data to MM0 for continuous report mode.
3)
Execute TS command and TC/AL to indicate the setting.
:MM0
:TS
PG0.100
VG2.0
VI5.00
(Omitted partially.)
RI0.020
ZP1.00
ZV1.4
:TC/AL
PH0
>TC0
AD0
CV2.0000
CA5.00
(Omitted partially.)
>TC15
:
4)
Copy the setting shown above to “Memopad,” then store it as a text file.
Edit and store the setting as described hereunder to be able to transfer it to ESA Driver Unit.
u
Add “KP1” to the top line.
u
Delete unnecessary character strings such as “:TS” and “:TC/AL.”
u
Delete all spaces of the head of the lines.
u
Change “>TC” to “CH.”
u
Add a line to each end of a channel program and the end of setting.
KP1
PG0.100
VG2.0
VI5.00
(Omitted partially.)
ZP1.00
ZV1.4
PH0
CH0
AD0
CV2.0000
CA5.00
CH1
AR3000
(Omitted partially.)
CH15
Add a line.
9.3.3.3. Transmit Stored Parameters to ESA Driver Unit
n
Transmit the stored file to ESA Driver Unit.
1)
Start HyperTerminal.
2)
Transmit the file by selecting “Transfer”
→
“Transmit text/file.”
3)
Execute TS or TC/AL command to confirm that the transmission of data is successful.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
