38
Take care not to touch the roll with your hand while the roll sheet is feeding.
If you touch the roll, printing problems may occur. Further, this may cause
generation of abnormal noise.
• Types of Roll Sheet
The following types of roll sheets are available. Please use the sheet sizes shown in the
following diagrams.
The descriptions in the brackets are the settings in the printer driver.
Reference
Refer to “3.4 Method of Using the Printer Driver” on P.64.
1. Continuous Roll Sheet (Glossy/Plain)
Diameter 140mm
or less
Diameter 76mm or more
(3-inch paper tube, etc.)
Width 40-80mm
2. Die Cut Sheet Rolls (Die Cut Labels)
• Among the commercially available die-cut sheet rolls, there are
some that will not allow tape feeding in this printer. Please contact
your nearest dealer for more information.
Diameter 140mm
or less
Diameter 76mm or more
(3-inch paper tube, etc.)
4mm or more
Label Sheet
Width 40-80mm
2.7 Setting the Roll Sheets
Note
• Glossy: Sheets that have glossy surfaces using gold and silver printing-
type polyester film.
• Plain: Sheets with dull surfaces using silver printing-type polyester film.
