40
2.8 Removing the Media
Menu
Cancel
Enter
Message
Online
In the situation where the plate or sheet that has been set in the printer is to be removed
before printing takes place, pressing the
Cancel
key will lift up the roller to allow the
media to be taken out.
After printing, the media is normally ejected. However, in the situation where the media
remains in the printer without being ejected, use the Remove function to remove the
media.
Reference
Refer to “4.2 Troubleshooting” on P.82.
In the situation where more than five minutes have passed since the printing
media was set in the printer with no operation being carried out, the roller
will automatically lift up to allow the media to be taken out.
