37
(4) Holding the ridged surfaces of the width regulating guide, match the width
regulating guide to the sheet width.
Locking Screw
Ridged Surfaces
(5) Insert the sheet into the feeding port until a “beep” sound is heard. If a double
beep is heard, please carry out the sheet setting procedure again.
Feeding Port
Carry out the printing setting in the PC as follows.
• Sheet
→
[Glossy]
[Plain]
[Die Cut Label]
[TOF Label]
Reference
Refer to “3.4 Method of Using the Printer Driver” on P.64.
In the situation where there is slackness in the sheet when the sheet has been fed into
the printer, rotate the roll to take up the slack.
Slack
2.7 Setting the Roll Sheets
