• To Remove a Plate
<<Menu>>
Remove
This feeds the plate.
Function This is used when a plate has become jammed and when the
plate is to be removed.
Reference Refer to “2.8 Removing the Media” on P.40, and “Has the plate or
sheet become jammed?” of “The plate or sheet cannot be fed
normally” in “4.2 Troubleshooting”, on P.83.
• To Eliminate Displacement in the Printing Position
<<Menu>>
Position Adjustment
This adjusts the printing image position displacement.
<<Menu>>
Length Adjustment
Function This is used when the leading edge or back edge of the printing
image is missing, and when the printing start position is
displaced.
The vertical line of the left border is missing.
Leading
Edge
Carry out fine adjustment of this dimension.
A B C D E
Refer to “When the Printing Position is Displaced” of “4.2 Troubleshooting”
on page 88.
• To Stop Printing
Cancel
By continuing to press the [Cancel] key for 3 seconds or more, it will be
possible to stop the printing.
• In the situation where printing is being carried out, the printing operation
will stop after the media that is being printed has been ejected, and the
remaining printing data will be cleared.
• Even before the printing has started, if the
Cancel
key is pressed for 3
seconds or longer, the printing data received from the PC can be deleted
and the printing can be abandoned.
Reference
Refer to “2.8 Removing the Media” on P.40.
81
4.1 Convenient Functions
