Nisca M-350 User Manual Download Page 48

Page: 48 / 105

Notes

• Connecting the USB Cable

The printer supports USB 2.0 interfaces.

• In the situation where the printer driver has not been installed in the PC

that is being used, install the printer driver before connecting the USB
cable.

• Note that this printer does not support use in a network environment.
• It is possible to connect and remove the USB cable while the PC and

printer power is on. However, in the following situations correct operation
may not be possible, so connection and removal should not be carried
out.

- While the PC is starting up, or when data processing is being carried

out.

- While printing is being carried out.
- While the printer driver installation is being carried out.

(1) Securely insert the USB cable B Type (square-shaped) plug into the USB

connector on the rear side of the printer.

(2) Insert the USB cable A Type (rectangular) plug into the USB port of the PC.

3.1 Installing the Printer Driver

Summary of Contents for M-350










































































































Search results

Summary of Contents for M-350

Reviews:

Related manuals for M-350

Brands by name

Popular brands

Nisca M-350, User Manual

Search results

Summary of Contents for M-350

Reviews:

Related manuals for M-350

Brands by name

Popular brands