Mitel MIVOICE OFFICE 250, Installation And Administration Manual

Page: 563 / 585

Phones
535
Device Configuration
The Device Configuration field allows you to configure network, audio and call control, firmware,
and trace settings.
Network : The Network Configuration page contains the network-specific configuration information.
Both SIP and ITP modes have the same fields. The Network Configuration page contains the fields
described in Table 84 . To apply the changes, click Update .
Status
Network
1-541
Network
Firmware
1-541
Firmware
License
1-542
License
N/A
1-542
Volume
Image Upgrade
1-542
Image Upgrade
RTP/RTCP
1-542
RTP/RTCP
Command
Configuration
1-542
Configuration
Reset
1-542
Reset
Table 84: IP Phone Web Interface: Network Configuration Page
Field Name Default Indicates
MAC Address xx-xx-xx-xx-xx-xx The phone MAC address.
Static (Default) IP
Address
192.168.200.201 The phone static IP address (when DHCP is disabled).
Default Network Subnet
Mask
255.255.255.0 The phone default network subnet mask.
Default IP Gateway
Address
192.168.200.201 The phone default IP gateway address.
IP Address Assignment DHCP Enabled Whether the IP phone uses DHCP to obtain an IP
address instead of using the assigned static IP
address.
TFTP Server IP Address 192.168.200.202 The IP address of the TFTP server where configuration
files for this phone reside. Required if the DHCP does
not provide the TFTP address.
You can also include the path to the profile file, if
desired. For example, if the TFTP server IP address is
“192.168.200.150” and the path file is “/basic_sip,”
then you can specify the URL as
“192.168.200.150/basic_sip.”
(Sheet 1 of 2)
Table 83: IP Phone Web Client Field Descriptions (Continued)
ITP Mode Page # SIP Mode
(Sheet 2 of 2)