Mitel MIVOICE OFFICE 250, Installation And Administration Manual

Page: 254 / 585

MiVoice Office 250 Installation and Administration Guide
226
NOTICE
Equipment Damage: Use adapters when connecting any 6-pin plug to an 8-pin jack. Although a 6-pin
plug will fit into an 8-pin jack, the plastic on the 6-pin plug housing will damage pins 1 and 8 on the 8-pin
jack. Not using adapters will increase the likelihood of failure (to pins 1 and 8 in the 8-pin jack) should
that jack need to be used with an 8-pin plug in the future. Various adapter types are available based on
how you choose to connect to the patch panel.
Figure 9: Example Voice Mail or DEI Connection to MiVoice Office 250 Base Server
Digital Endpoint
DB-15
(to VM only or DEI)
To VM only or next DEI only
To MiVoice Office 250 only
Optional Component(s)
DEI (1) Chassis Back
Optional External VM
Cable to external VM
(part number, 813.1806
Ethernet to LAN via switch
MiVoice Office 250 Base Server
DUAL LS DUAL SL
EXP
PAGE MOH
Ethernet to LAN
DEM-16
1 – 4 5 – 8 9 – 12 13 – 16
BA
Y
1
EXP 2
EXP 1
through switch
DEI cable
part number,
813.1847 or
.
DEI
DEI
LAN
SWITCH*
Modules (DEM-16)
BU
SY
O
N
LI
N
E
or Single Line Modules
(SLM-8)
If a DEI chassis exists as
part of the configuration,
you must connect the
external voice mail
computer to the bottom
DB-15 connector on the
last
DEI chassis in the
chain. Up to four DEI
chassis are supported in
the system.
813.1847-001
Ethernet cable to LAN
through switch
See
Table 38,
“Time Slots
for DEIs,”
on
page 219
for capacity
Base Server Back (CS Controller in this example)