Mitel MIVOICE OFFICE 250 Installation And Administration Manual Download Page 36

Page: 36 / 585

MiVoice Office 250 Installation and Administration Guide

Security Updates

• New OpenSSL version 1.0.2l
• Improvements have been made to the existing Firewall, including the ability to save and restore

settings. Firewall configuration options have been extended to include the PS-1 when equipped

with the MiVoice Office 250 6.3 software release.

Discontinuation of UCX (Unified Communicator Express)

Unified Communicator Express was discontinued in May 2015. It is now removed from MiVoice

Office 250 R6.3 documentation.

Summary of Contents for MIVOICE OFFICE 250










































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MIVOICE OFFICE 250

Reviews:

Mitel MIVOICE OFFICE 250, Installation And Administration Manual, Page: 36 / 585

Search results

Summary of Contents for MIVOICE OFFICE 250

Reviews: