Mitel MIVOICE OFFICE 250, Installation And Administration Manual

Page: 578 / 585

MiVoice Office 250 Installation and Administration Guide
550
• Remote Node Number: Select the node(s) you want to export the information to or import
the information from, by placing checks in the appropriate boxes.
• Device Type: Select any combination of device types you want to export or import by
checking the appropriate boxes. IP device information is automatically included if you import
or export all phones. In addition, IP SLAs are automatically included if you import or export
all single line sets.
When you click Start to begin the export or import operation, the lower panel shows the export
or import status.
If you are exporting information, the node you are exporting from is listed as “Node X: Export
Source.” The destination node or nodes will show the node number and the current status of
the export. Once the import from a node is completed, either successfully or unsuccessfully, the
import source node displays the final status of the import. The screen will show messages as
explained in Table 100 .
3. After completing an import operation, terminate DB Programming to update the database.
If the local node cannot communicate with the remote node, the export or import will fail. Before
you attempt to export or import information, verify that you can reach the remote node by dialing
the extension assigned to the remote node. If you hear dial tone, you should be able to
successfully export or import information. If you receive a
NOT REACHABLE
message, you must
determine why calls are not properly being routed to the specified remote node before you can
export or import information. If you camp on to a node while trying to reach the remote node,
wait for the node trunk group to become available so that you can guarantee the remote node
can be reached.
NOTE
ACD agents may be imported or exported the same as the other device types.
Table 100: Node Status Descriptions
Status Meaning
Starting Up Indicates that the node is attempting to initiate the export.
Creation XX% This node is XX percent done with the creation portion of the export.
Deletion XX% This node is XX percent done with the deletion portion of the export.
COMPLETED This node successfully completed the export.
Waiting... When importing, this status indicates that this node is waiting for
another node to finish before it can become an import source
Error – Not Reachable The export to the node failed because the export source node could not
communicate with this node.
Error – Phone Programming The export to the node failed because someone on the node was
performing Phone Programming.
Error – Voice Processor The export to the node failed because the link to the Voice Processor is
down.
Error – DB Programming The export to the node failed because someone on the node was
performing DB Programming.