Mitel MIVOICE OFFICE 250 Page 228 Installation And Administration Manual Download

Page: 228 / 585

MiVoice Office 250 Installation and Administration Guide

200

Insert the SLM-4 module into the empty bay. The green LED labeled

ONLINE

illuminates, indi

cating that the new hardware has been detected and the Single Line (SL) application is running.

Using the IP address of the Mitel 5000, open a DB Programming session to the system through

the System Administration & Diagnostics application.

When DB Programming displays, in the left pane select System and then Communication Server.

Click the

Uninstalled

bay and click the down arrow.

Select

Single Line Module - 4

Program the SLM-4 module in the chosen uninstalled bay.

10.

Click the SLM-4 folder and configure the ports.

11.

Program the individual single line phones in DB Programming. For programming details, refer

to the

MiVoice Office 250 Features and Programming Guide

12.

Connect and test the phones.

NOTE

The programming portion of the SLM-4 installation procedure may be performed in an offline

session of DB Programming and then restored to the system using the Database Restore utility.

Summary of Contents for MIVOICE OFFICE 250










































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MIVOICE OFFICE 250

Reviews:

Related manuals for MIVOICE OFFICE 250

Brands by name

Popular brands

Mitel MIVOICE OFFICE 250, Installation And Administration Manual

Search results

Summary of Contents for MIVOICE OFFICE 250

Reviews:

Related manuals for MIVOICE OFFICE 250

Brands by name

Popular brands