Mitel MIVOICE OFFICE 250, Installation And Administration Manual, Page: 434 / 585

MiVoice Office 250 Installation and Administration Guide
406
Network Operation of System Features
When a MiVoice Office 250 is programmed for use in a network the features listed here are affected.
Refer to the features information in the
MiVoice Office 250 Features and Programming Guide
for
details.
•
Administrator Feature Codes :
MiVoice Office 250 Features and Programming Guide
• Clear Network Alarm: Administrators who receive network-wide alarms can clear them.
The default feature code for the clear network alarm feature is 9851. See page 412 for more
information on network alarmsthe
MiVoice Office 250 Features and Programming Guide
.
• Enable Network Night or Day Mode: Administrators can place any or all remote nodes
into night mode or day mode. The default feature code for Enable Network Night is 9861.
The default feature code for Enable Network Day is 9862. The Night Ring On/Off feature
code (9860) affects only the node on which the administrator resides. the
MiVoice Office
250 Features and Programming Guide
• Set Network Date And Time: Administrators can synchronize the time of day, date, and
day of week across the network. The default feature code for the synchronize network time
of day feature is 9810. Note that administrators can still set the time of day, date, and day
of week on their local node. the
MiVoice Office 250 Features and Programming Guide
• Synchronize Network Time: Administrators can synchronize the minutes past the hour
across the network without changing the hour. This is useful when the nodes are in different
time zones. The default feature code for the synchronize network minutes past the hour is
9811. If the node time is off by more than 30 minutes, synchronizing the minutes may cause
the hour to change. Also, network time is automatically synchronized every day at 12:30
AM (00:30), using the time setting on the node with the lowest number. the
MiVoice Office
250 Features and Programming Guide
• Network Freeze/Unfreeze Zone: Administrators can perform a history freeze or unfreeze
on any freeze zone. The default feature code for Network Freeze is 9939 and Network
Unfreeze is 9989. the
MiVoice Office 250 Features and Programming Guide
• Administrator DB Programming : The administrator can change extensions and usernames
of only those users residing on the same node as the administrator. The network prohibits the
administrator from programming an extension conflict. The network automatically broadcasts
changes to extensions and/or usernames made by an administrator to the other nodes in the
network. the
MiVoice Office 250 Features and Programming Guide
• Attendant Phones : An attendant does not need to reside on the same node as the phones it
serves. the
MiVoice Office 250 Features and Programming Guide
• Node Attendants : There can be a primary attendant for each node.
MiVoice Office 250 Features
and Programming Guide
• Network Primary Attendant : There can be a network primary attendant programmed on each
node. (There is usually one Network Primary Attendant shared by all of the nodes.) When the
network needs to direct a call to an attendant, it attempts to direct the call to the network primary
attendant first. If the network primary attendant is unavailable because the network is unable to
route the call, it directs the call to the attendant on the node where it originated. the
MiVoice
Office 250 Features and Programming Guide