Mitel MIVOICE OFFICE 250, Installation And Administration Manual, Page: 580 / 585

MiVoice Office 250 Installation and Administration Guide
552
8690 Phone Programming
The following sections describe how to install the 8690 phone.
Windows CE .NET Programming (8690 Phone Only)
This section provides information about 8690 phone programming using the 8690 client application
on Windows CE .NET. For complete information about how to use the 8690 client application, refer
to the
8690 Administrator’s Guide
(document part no. 550.8120) and the appropriate
Mitel Phone
User Guide
(ITP or SIP mode). The following issues are discussed in this section:
• Running the 8690 Setup Wizard below.
• Upgrading the 8690 on page 553 .
• Reformatting the 8690 Flash File System on page 555 .
• Installing the 8690 on page 556 .
• Configuring Phone Ports for a VLAN. Refer to the “Phones and Devices” chapter in the
MiVoice
Office 250 Features and Programming Guide
.
Running the 8690 Setup Wizard
The first time the 8690 client application runs, the Setup Wizard launches. Once you successfully
complete the Setup Wizard, it will not run again. The
Default Configuration
option on the Advanced
menu resets the phone to its default state. If the Default Configuration option is run, the Setup Wizard
will run automatically the next time the client application starts.
To run the Setup Wizard:
1.
EITHER
, Press Network and Dial-up Connections (under Windows CE .NET\Control Panel).
OR
, Press the Unified Communicator
®
(UC) Tray client icon ( ), then press Advanced – Run
Setup Wizard from the menu. Press Next at the opening screen.
2. Select a network adapter from the list or accept the default adapter. Press Properties .
3. Press the option Obtain an IP address via DHCP . If the phone is not using DHCP, then specify
the hostname or IP address of the phone, the subnet mask, the default gateway, and the DNS
server. Then press Next .
4. In the Phone Configuration Download screen, enter the hostname or IP address of the computer
hosting the phone configuration file in the format: 172.34.56.78.
5. At the UC screen, enter the following information. If you do not enter this information now, you
will be prompted for it each time you log on or power on the phone.
• Web Address : Enter the URL for the UC computer where your account is located.
• Username : Enter your account username.
• Password : Enter your account password.
NOTE
UC is included in the 8690 client application package. This application provides simplified
access to phone functionality, advanced phone features, and presence management
options.