Mitel MIVOICE OFFICE 250, Installation And Administration Manual

Page: 573 / 585

Phones
545
static_ntp_ip 0.0.0.0 The IP address of the NTP server if DHCP is
not used. DHCP may also supply a NTP
server. If this parameter has an IP address, it
overwrites the DHCP NTP server IP address.
N/A
tftp_update_enable 1 Whether to perform the configuration updates
from the TFTP server. The options are:
• 0 – Disable
• 1 – Enable
Note:
If this flag is disabled (set to 0) and the
DHCP server provides the TFTP IP address
and path, the phone will not start the update.
See “Enable TFTP
Configuration Update” on
page 536.
tftp_url_dhcp 1 Whether to overwrite the TFTP URL in the
TFTP Server IP Address field, listed above,
with the TFTP server IP address and path
from the DHCP server. The options are:
• 0 – Ignore the TFTP server IP address and
path from the DHCP server.
• 1 – Program the TFTP server IP address
and path from the DHCP server to the
tftp_url configuration parameter on the
phone.
See “Use DHCP for
TFTP Server and Path”
on page 536.
lan_pq_port 0x0000 Specifies which of the Ethernet ports support
802.1P/Q. A “1” bit indicates that the port
supports 802.1P/Q.
Note:
This parameter does not apply to
phones with v1.1.x or later firmware.
For the 8690 phone:
• Bit 0x0001 – LAN/PWR Port
• Bit 0x0002 – P1 Port
• Bit 0x0004 – P2 Port
• Bit 0x0008 – P3 Port
For 8620/8622 and 8662 phones:
• Bit 0x0001 – LAN/PWR Port
• Bit 0x0002 – PC Port
For the 8600 phone:
• Bit 0x0001 – LAN/PWR Port
VLAN Configuration (see
page 540)
telnet_port 23 The port number of the Telnet server. A zero
value disables the Telnet server.
N/A
Table 96: IP Phone Web Client Field Names—Network Settings (Continued)
Parameter Default Indicates (Continued)
IP Phone WEB
Client (Page #)
(Sheet 2 of 3)