Mitel MIVOICE OFFICE 250, Installation And Administration Manual, Page: 298 / 585

MiVoice Office 250 Installation and Administration Guide
270
For information about programming Mitel 8600 series phones, refer to the
MiVoice Office 250
Features and Programming Guide
.
Mitel 8690
The Mitel 8690 multi-protocol phone has a touch screen that displays feature, dialpad, and menu
buttons. It supports IP or SIP mode using 100Base-TX interfaces. The Mitel 8690 is configured to
use IP mode by default. For details, see page 275.
The Mitel 8690 includes the following connections points and options:
•
LAN/POWER Jack : Connects to an external power supply or a network hub/switch.
• PC Ports 1-3 : Connect to PCs or any other 100Base-T Ethernet devices. The speeds on the
single uplink and three downlink ports are independent from each other and auto-negotiable.
• Headset/Handset Jack : Connects to a headset or handset.
• SPKR Jack : Connects to a speaker and supports mono for IP phone and stereo for Windows
CE playback.
• MIC Jack : Connects to a microphone equipped with a 3.5mm plug.
• Reset Button : Resets the phone when pressed and released quickly.
• CF Port : Connects to a matchbook-sized compact flash-type memory card that can be used for
copying music, pictures, etc. to the Mitel 8690. The card also can be used for additional memory.
NOTE
86xx multi-protocol phones in SIP mode are not supported on the MiVoice Office
250 platform. See
page 275
for changing from SIP mode to IP mode.
Figure 4: Mitel 8690 Connection Interfaces
NOTE
If you press and hold the Reset button until the four LEDs on the front of the phone (Message
Lamp) start blinking, the system defaults the phone configuration (such as the configuration
TFTP URL).
LAN/POWER
LEDs
Front Back
PCs 1, 2, and 3
(Downlink RJ-45)
PCMCIA
USB CLIENT
USB CF
MIC SPKR
Reset Button
HEADSET
Jack*
HANDSET
Jack*
*The headset and handset jacks are located on the base.
HOST
(Uplink RJ-45)