Mitel MIVOICE OFFICE 250, Installation And Administration Manual, Page: 220 / 585

MiVoice Office 250 Installation and Administration Guide
192
To remove a dual T1/E1/PRI module:
1. Using a properly terminated anti-static wrist strap, loosen the fastener at the top of the module
(this fastener secures the module to the chassis).
2. Push down and hold the module release lever, and then when the REMOVE LED turns green,
grasp the module handle and carefully remove the module from the chassis.
Figure 6: Dual T1/E1/PRI Module
DUAL LS DUAL SL
EXP
PAGE MOH
Chassis Back
Module Release Lever Dual T1/E1/PRI Module
Remove
Module to Chassis Fastener
Module LED
Module Handle
Top
Side
(CS Controller
in this example)