Mitel MIVOICE OFFICE 250, Installation And Administration Manual

Page: 569 / 585

Phones
541
To specify the VLAN ID, enter the VLAN ID for each port. The available ports vary depending on the
IP phone.
To enable the LAN QoS feature, check Enable LAN QoS . The values of the QoS are pre-defined
and cannot be changed.
For more information about phone VLAN settings, refer to the “Phones and Devices” chapter in the
MiVoice Office 250 Features and Programming Guide
.
To apply the changes, click Update .
Status
Network: The Network Status page shows network information. Both SIP and ITP modes have the
same fields. The page contains the fields shown in Table 92 .
Firmware : The Firmware Information page shows current firmware information. Both SIP and ITP
modes use the same page. This page contains the fields described in Table 93 .
Table 92: Network Status Indications
Field Name Indicates
Physical Address Phone MAC address.
IP Address Phone IP address.
Subnet Mask Network subnet mask.
Default Gateway Network gateway.
DHCP Server DHCP server IP address the phone obtains.
DNS Server DNS server IP address the phone uses.
Link Status Link status of ports 0 and 1.
Negotiation Negotiation status of ports 0 and 1.
Speed Connection speed of ports 0 and 1.
Duplex Connection mode of ports 0 and 1.
Table 93: Firmware Information Page Descriptions
Field Name Indicates
Application Name Phone application type, such as the 8600, 8660, 8662 phones.
Image Version Version of the application.
Phonex Version Version of the Broadcom Phonex (Phone Exchange) software.
Date/Time Current date and time.
Boot Code Version Version of boot image version number.
Hardware Type Model type.
Tool Information Versions of the tools (for example, gcc, GNU assembler, etc.).