1-4 Safety Precautions
6.
DO NOT use a probe that has a damaged, scratched
surface, or exposed wiring of any kind. Immediately
stop using the probe and contact Mindray Customer
Service Department or sales representative. There is
risk of electric shock if a damaged or scratched probe
is used.
7.
DO NOT allow the patient to contact the live parts of the
ultrasound system or other devices, e.g. signal I/O
ports. Electric shock may occur.
8.
Do not use an aftermarket probe other than those
specified by Mindray. The probes may damage the
system, causing a profound failure, e.g. a fire in the
worst case.
9.
Do not subject the probes to knocks or drops. Use of a
defective probe may cause an electric shock.
10.
Do not open the covers and front panel of the system.
Short circuit or electric shock may result when the
system hardware is exposed and powered on.
11.
DO NOT use this system simultaneously with
equipment such as an electrosurgical unit,
high-frequency therapy equipment, or a defibrillator,
etc. Otherwise, there is a risk of electric shock to the
patient.
12.
Only use the ECG leads provided with the ECG module;
otherwise electric shock may result.
13.
When moving the system, you should first fold the LCD
display, disconnect the system from other devices
(including probes) and disconnect the system from the
power supply.
14.
Accessory equipment connected to the analog and
digital interfaces must comply with the relevant IEC
standards (e.g., IEC 60950 information technology
equipment safety standard and IEC 60601-1 medical
equipment standard). Furthermore, all configurations
must comply with the standard IEC 60601-1-1. It is the
responsibility of the person, who connects additional
equipment to the signal input or output ports and
configures a medical system, to verify that the system
complies with the requirements of IEC 60601-1-1. If you
have any questions regarding these requirements,
consult your sales representative.
15.
Prolonged and repeated use of keyboards may result in
hand or arm nerve disorders for some individuals.
Observe the local safety or health regulations
concerning the use of keyboards.
16
The operator SHOULD NOT touch SIP/SOP and the
patient at the same time.
17
If the battery cannot be automatically maintained in a
fully usable condition, please conduct periodic
checking of the battery.
Summary of Contents for M5 Exp
