Mindray M5 Exp, Operator'S Manual

Page: 172 / 357

5-92 Image Optimization
Parameter Type Description
U/D Flip
Radio
button
To set the default vertical flipping mode: Up or Down.
Rotation
Drop-down
list
To set the default rotate angle in B mode.
B IP
Drop-down
list
Button
To set the default B IP value.
THI IP
Drop-down
list
Button
To set the THI IP parameters.
High FR Check box To set if high FR is turned on by default.
Needle Steer
Drop-down
list
Button
To set the Needle Steer levels.
B/iNeedle Check box To set if B/iNeedle is turned on by default.
Click [Record Current] to record all the currently-used setting and values for each
preset image parameter.
Click [Load Factory] to restore the settings to the original factory default.
5. Exit:
Click [OK] to save the settings and exit.
Click [Cancel] to abandon the settings and exit.
5.16.2 Soft Menu and Menu Preset
Click [Menu Preset] on the Image Preset screen to open the Menu Preset page. The
default is the currently-used probe in the current imaging mode.
The system supports menu preset of all image modes including image freeze, cine review
and sub modes (3D View, Static 3D, 4D, Smart 3D, Reset ROI, etc.) with all probe types.
Menu items in cine reviewing of all image modes are the same.
Since the preset operations are the same for different image modes and status, the
following case (linear probe in real time B mode) is taken as an example.
5.16.2.1 Soft Menu Preset
The soft menu preset screen is shown as the figure below: