Mindray M5 Exp, Operator'S Manual

Page: 351 / 357

iScanHelper D-1
Appendix D iScanHelper
By providing the referential information, such as, the ultrasonic image, the anatomic graphic,
scanning pictures/other scanning tips or diagnosis comments, the system helps the doctors to
operate the scanning by iScanHelper. Furthermore, it is a good platform for the self-learning
and training of ultrasound scanning technique for doctors. The system also plays a role in the
assistant software system in fulfilling training and education.
Tips: iScanHelper feature is available under abdominal, urological, obstetrical, small parts and
nerve block area.
NOTE:
THIS “iScanHelper” IS FOR REFERENCE OR TUTORIAL PURPOSES ONLY,
AND THE MANUFACTURER WILL NOT BE LIABLE FOR DAMAGES AND/OR
OTHER UNDESIRABLE CONSEQUENCE IN ANY KIND THAT MAY OCCUR TO
THE PATIENT OR THE USERS BY USING THE SOFTWARE.
D.1 Enter/ Exit
Enter
Press the user-defined key for entering iScanHelper (setting path: [Setup] -> [System] ->
[Key Config.]).
Exit
Press the user-defined key again to exit iScanHelper.
D.2 Use iScanHelper for Reference
1. Perform ordinary scanning procedure.
2. Press the user-defined key for entering iScanHelper to enter iScanHelper status.
3. Rotate the trackball to move the cursor onto the target view name in the view selecting box
and then press <Set>.
4. Perform scanning according to information displayed on the help information area.
You can zoom in a single window in the help information area to see the window more
clearly. For details, please refer to “D.4.3 Single/quad-window Display”.
5. Press the user-defined key for entering iScanHelper again to exit.
D.3 Use iScanHelper for Learning or
Training
1. Switch to the exam modes that support iScanHelper.
2. Press the user-defined key for entering iScanHelper to enter iScanHelper status.
3. Learn and practise views by system defaulted sequence according to the information
displayed on help information area; or select unfamiliar views to practise.
You can zoom in a single window in the help information area to see the information. For
details, please refer to “D.4.3 Single/quad-window Display”.
4. Press the user-defined key for entering iScanHelper again to exit iScanHelper.