Micromeritics Gemini VII 2390a, Operator'S Manual

Page: 284 / 426

Appendix B Gemini VII
B-18 239-42828-01 - Nov 2013
4057- At least two data points are needed for Freundlich calculations.
4059- Fewer than 2 points available for MP-Method calculations.
4060- Sample [file name] contains no data points.
4061- The t-curve must contain at least 2 points.
4062- Error during report preparation.
4063- The data requested on this report are not available. No subreports selected.
Cause: Less than two data points have been selected for the Freundlich
report; at least two are required.
Action: Select Freundlich points on the Collected Data window. If calculation
assignments are not being used, edit the Freundlich Report options,
Absolute pressure range
in the sample file.
Cause: At least two points are required for the MP-Method calculations.
Action: Edit the calculation assignments for the MP-Method report.
Cause: An attempt was made to save a sample without collected data as a t-
curve or alpha-S curve.
Action: Repeat the Save As t-curve or Save As Alpha-S operation after
opening a sample that has collected data.
Cause: At least two points are required in a thickness curve definition.
Action: Edit the thickness curve.
Cause: An internal processing error has occurred.
Action: Contact a Micromeritics service representative if this error message
continues.
Cause: There is no information in the sample log to report.
Action: A sample file was selected which no instrument operations has been
used. Select a sample file with a status of
Prepared
,
Preparing
,
Analyzing
or
Complete
to obtain a valid sample log report.