Micromeritics Gemini VII 2390a, Operator'S Manual, Page: 135 / 426

Gemini VII Report Options Files
239-42828-01 - Dec 2012 5-25
Pressures button
Click to enter a range of pressure points or to modify table values for
pressure points.
If
Use calculation assignments
is not selected on the
Analysis
Conditions
window, the isotherm is interpolated to these pressure points.
The interpolated values are used in the BET (or Langmuir) calculations.
If
Use calculation assignments
is selected, collected data are used.
•
Use pressure range
option- select and enter the pressure range to be
used in the text boxes if not using the Interpolate pressures table.
•
Interpolate pressures
option- select to indicate if the system should
use the table or entered data.
•
Insert Predefined
button - click to insert a predefined (default) set of
points into the report. This button does not display for the Langmuir
report.
Interpolate pressures
checkbox must be selected to enable this
button.
Field or Button Description (continued)