Micromeritics Gemini VII 2390a, Operator'S Manual

Page: 277 / 426

Gemini VII Appendix B
239-42828-01 - Nov 2013 B-11
4008- Report requested on sample file with no data points.
4014- File [name] is not a valid file for conversion.
4023- The file [file name] cannot be prepared for analysis. It is open for editing and
contains errors.
4026- Cannot calculate Dubinin-Astkahov: bad least squares data.
4027- Fewer than two sample files have data suitable for heat of adsorption reports.
4028- Dubinin calculations cannot be performed because the affinity coefficient of
the analysis gas is zero.
Cause: The selected file contains no collected data.
Action: Select another file which contains collective data and restart the
report.
Cause: The file selected for conversion is not a valid file.
Action: Select only files that have been created by the proper program.
Cause: An attempt was made to start an analysis using a file that contains
errors and is open for editing.
Action: Finish editing this file, save and close it, then start the analysis.
Cause: Less than two selected data points are within the fitted pressure range.
Action: Edit the calculation assignments on the Collected Data window or
change the fitted pressure range on the Dubinin report options
window.
Cause: Less than two of the selected sample files for heat of adsorption
reports contain appropriate data.
Action: Edit the Quantity Adsorbed table or select other sample files.
Cause: Dubinin values could not be calculated because the affinity
coefficient of the analysis gas is zero.
Action: Access the Dubinin Report Adsorptive options in the sample file and
enter an appropriate value for the analysis gas.