Micromeritics Gemini VII 2390a, Operator'S Manual

Page: 271 / 426

Gemini VII Appendix B
239-42828-01 - Nov 2013 B-5
2482- File cannot be opened for writing. It is already in use.
2483- An analysis cannot be performed on [file name]. It is open for editing and con-
tains errors.
2484- The edit session for [file name] must be saved before the analysis. Save

changes and continue with the analysis? [Yes, No]
2486- Could not construct [name] report type. Program will terminate.
2487- Could not start report generator. Error code [n]. Program will

terminate.
2488- File [file name] cannot be opened for editing. It is already in use.
Cause: An attempt was made to open a file currently being used.
Action: Locate the application using the file (in the Micromeritics application,
use the Windows menu item to get a list of all windows, one of which
may contain this file).
Cause: An attempt was made to use a sample file containing errors that is
currently open.
Action: Go to the window containing the file, correct the errors and save it.
Cause: An attempt was made to start an analysis using a file that contains
unsaved changes and is open for editing.
Action: Select
Yes
to save the changes and proceed with the analysis. Select
No
to cancel the analysis and continue editing the Sample
Information file.
Cause A: Full rights to the application’s folders and files is required.
Action A: Contact a system administrator to have full rights granted.
Cause B: An internal processing and/or hardware error has occurred.
Action B: Contact a Micromeritics service representative if this error message
continues.
Cause: The specified file is being used in another edit operation.
Action: Check the Windows list to locate the other edit session.