Micromeritics Gemini VII 2390a Operator'S Manual Download Page 96

Page: 96 / 426

Installing the Software

Gemini VII

4-18

239-42828-01 - Dec 2012

On the new

Move Analyzer

screen, select the new destination for the analyzer to be moved. This

location is where the

Analyzer SN [n] Installer.exe

file will be located. To accept the default

location, click

Next

or click

Browse

to select a new destination, then click

Next

The analyzer serial number

[n]

files are moved to the install program and the

Analyzer Installer

Created

screen displays. Click

Finish

a.) Remove the CD from the CD-ROM drive and store in a safe location.

b.) Disconnect the Ethernet cable from the

Source

computer and reconnect it to the configured

Ethernet port on the

Destination

computer. If moving the analyzer to a computer that already

has an analyzer attached, an Ethernet switch is required.

c.) If the move destination was a local drive, navigate to the drive and copy the

Analyzer SN [n]

Installer.exe

file to a media device such as a USB stick. Install the file on the destination

computer, then double-click the

Analyzer SN [n] Installer.exe

file.

If the move destination was a network drive, navigate to the location then double-click the

Analyzer SN [n] Installer.exe

file.

Summary of Contents for Gemini VII 2390a











































































































































































































































































































































































































































Search results

Summary of Contents for Gemini VII 2390a

Reviews:

Related manuals for Gemini VII 2390a

Brands by name

Popular brands

Micromeritics Gemini VII 2390a, Operator'S Manual

Search results

Summary of Contents for Gemini VII 2390a

Reviews:

Related manuals for Gemini VII 2390a

Brands by name

Popular brands