Micromeritics Gemini VII 2390a, Operator'S Manual, Page: 276 / 426

Appendix B Gemini VII
B-10 239-42828-01 - Nov 2013
2533- Analyzer initialization failed.
2585- The following libraries are missing: <library-name>, <library-name>, ....
2599- The selected file has an extension that is not supported by this operation.
4000 Series
4003- Error Converting Pressures.
4004- Error Computing Volume Adsorbed.
4005- Pressures were not smoothed. Not enough pressures below 0.10 P/Po .
4006- Report Type Not Found.
4007- Error
Processing Report.
Cause: An internal processing and/or hardware error has occurred.
Action: Contact a Micromeritics service representative if this error message
continues.
Cause: This message is triggered on application start up if any of the library
files used by an application, does not exist on disk
Action: Add the library into the Libraries folder.
Cause: The selected file does not have a supported file extension.
Action: Open the adsorptive properties file. Open the FPI file selector and
select another file with a supported file extension.
Cause: An internal processing and/or hardware error occurred during report
generation.
Action: Contact a Micromeritics service representative if this error message
continues.
Cause: The
Smooth pressures below 0.10 P/Po
option was selected on the
Report Options window. There must be at least 10 pressures within
this range for smoothing to occur.
Action: Deselect this option to disable this message.
Cause: An internal processing and/or hardware error occurred during report
generation.
Action: Contact a Micromeritics service representative if this error message
continues.