Micromeritics Gemini VII 2390a, Operator'S Manual

Page: 385 / 426

Related Topics
See "QuickStart Degas Conditions" on page 3 - 2
See "Start Smart VacPrep Degas" on page 3 - 5
See "Set the Voltage for the Smart VacPrep" on the next page
S
PECIFICATIONS FOR THE
S
MART
V
AC
P
REP
The Smart VacPrep degasser has been designed and tested to meet the following specifications:
Computer
Windows 7 Professional or higher operating system is recommended for the best user
experience. If the computer is to be connected to a network, a second Ethernet port on the
computer must be used for that purpose.
Specification Description
Backfill Options Automatically backfill or wait for user command
Capacity 6 ports
Degas Method Heat and vacuum
Physical Dimensions
Height: 69 cm (27 in.)
Width: 53 cm (20.75 in.)
Depth: 44 cm (17 in.)
Weight: 32 kg (70 lbs)
Evacuation Period
Determined by selected elapsed time or achievement of selected low pres-
sure target
Evacuation Rate
Selectable evacuation rate from 1.0 to 50.0 mmHg/s
Heating of Samples Heating mantles
Heating Ramp Rate Selectable from 0.1
o
C per minute to 10
o
C per minute
Soak Time Zero to 999 minutes in one minute increments (Zero = Manual Cancel).
Temperature Accuracy
Deviation less than ±10
o
C at the sensing thermocouple embedded in the
heating mantle
Temperature Control
One ramp during evacuation phase, five additional ramps during sub-
sequent phases
Temperature Range
40 to 450
o
C in one degree increments
Vacuum Control Selectable target pressure controls switchover from restricted to unres-
tricted evacuation.
Specifications for the Smart VacPrep
Specifications for the Smart VacPrep
Smart VacPrep Operator Manual 1 - 3