Micromeritics Gemini VII 2390a Operator'S Manual Download Page 282

Page: 282 / 426

Appendix B

Gemini VII

B-16

239-42828-01 - Nov 2013

4048- Warning: An error occurred while restoring the heat of adsorption report editor.

4049- The sample [file name] does not have enough data. A minimum of two adsorp-

tion points is required.

4050- None of the requested quantities adsorbed is within the range of the collected

data of more than one sample file.

4051-

The sample [file name] does not have any data in the range of the requested
quantities adsorbed.

4052- Fewer than two points are selected for this report.

Cause:

The state of the heat of adsorption report editor could not be restored.
Default settings will be used.

Action:

No action.

Cause:

A sample file has been included in the Heat of Adsorption report that
does not have enough data.

Action:

Remove the file from the selected file list.

Cause:

The Heat of Adsorption report failed because the specified quantities
are not within the range of the collected data.

Action:

Edit the quantities adsorbed so that they are within the range of the
collected data or select other sample files.

Cause:

The sample’s data cannot be interpolated to any of the quantities
adsorbed.

Action:

Edit the quantities adsorbed so that they are within the range of the
collected data.

Cause:

At least two points are required for the BET calculations.

Action:

Edit the calculation assignments for the BET report.

Summary of Contents for Gemini VII 2390a











































































































































































































































































































































































































































Search results

Summary of Contents for Gemini VII 2390a

Reviews:

Related manuals for Gemini VII 2390a

Brands by name

Popular brands

Micromeritics Gemini VII 2390a, Operator'S Manual

Search results

Summary of Contents for Gemini VII 2390a

Reviews:

Related manuals for Gemini VII 2390a

Brands by name

Popular brands