Micromeritics Gemini VII 2390a, Operator'S Manual, Page: 52 / 426

Preparing for Analysis Gemini VII
3-16 239-42828-01 - Dec 2012
6. Select the
Show graphic
checkbox to insert a graphic in the report header. Use the
Browse
button
to locate a .BMP or a .EMF file. Specify the graphic size in the
Height
and
Width
text fields.
Deselect this option to omit a report graphic.
7. The
Selected Reports
list box displays the reports that may be generated.
a.) Select the checkbox to the left of the report to include in this file. A selected box displays a
checkmark in the box.
b.) To specify report options, highlight the report in the
Selected Reports
list box and click
Edit
. Makes changes as necessary. Click
OK
.
8. Click
Save
, then click
Close
. The file saves with a .RPO file extension.
Preparing for Analysis
The following table outlines the tasks to properly prepare for an analysis and the location of the task
procedure. It is recommended to perform the tasks in the following order:
Task Name and Location
Clean the sample tube Cleaning and Labeling Sample Tubes
, page
3-17
Create the sample file Defining Sample Information Files
, page
3-6
Weigh the sample Determining the Sample Mass
, page
3-18
Degas the sample Degassing the Sample
, page
3-20
Load sample on sample port Installing the Sample Tube
, page
3-21
Fill Dewar and check LN2 level Installing the Analysis Dewar
, page
3-22