Micromeritics Gemini VII 2390a, Operator'S Manual

Page: 273 / 426

Gemini VII Appendix B
239-42828-01 - Nov 2013 B-7
2499- Sequence number must contain at least 3 digits.
2500 Series
2500- All sample file names that can be created using the sequence number pattern
already exist. You may want to modify the next sequence number.
2505- Error logger cannot be initialized. Error code [n]. Program will exit.
2506- Sample file [file name] has a 'No Analysis' status and cannot be used for this
operation.
2508- [sample file] Overlay file [name] was not found. It will not be included in the
reports.
2509- [sample file] Error opening file [name] [error]. Reports cannot be produced.
Cause: An attempt was made to enter a sequence number that did not contain
at least three digits.
Action: Enter a sequence number that contains at least three digits.
Cause: No more sample information files can be created using the currently
entered file name sequence number.
Action: Select
Options > Sample defaults
and enter another sequence
number.
Cause: An internal processing error has occurred.
Action: Contact a Micromeritics service representative if this error message
continues.
Cause: The selected sample file does not have collected data and cannot be
used for operations, for example, reporting.
Action: Enter the name of a file with a status of Complete, Analyzing or
Entered or select a sample file from the list box.
Cause: The specified overlay file could not be found.
Action: Ensure the file specified as an overlay exists.
Cause: An error occurred while the program was opening a file necessary to
the report operation.
Action: Use the name given in the error message to investigate. Contact a
Micromeritics service representative if this error message continues.