Micromeritics Gemini VII 2390a, Operator'S Manual

Page: 191 / 426

Gemini VII Service Test
239-42828-01 - Dec 2012 6-23
Load from File
Unit [n] > Calibration > Load from File
Use to load a previously saved calibration file.
It is recommended that the current calibration settings be saved using
Unit [n] > Calibration > Save to
File
prior to loading another calibration file. When loading a previously saved calibration file, a
backup of the current file is created and saved as
[SN]last.cal.
The backup file is overwritten each time
a new one is created.
Service Test
Unit [n] > Service Test
Use for service tests performed only with the assistance of a trained Micromeritics service representa-
tive. These tests provide the service representative with troubleshooting tools and readouts.
This option is enabled only when the analysis program is operating in Service Test mode. Refer to

Service Test Mode
, page
8-4
.

Changing the calibration may affect the instrument’s performance.