Micromeritics Gemini VII 2390a, Operator'S Manual

Page: 129 / 426

Gemini VII Report Options Files
239-42828-01 - Dec 2012 5-19
Apply thermal
transpiration
correction checkbox
Select to correct the temperature-induced pressure difference between the
manifold and the chilled sample tube. This option is most significant for
pressures less than approximately 1.0 mmHg. Do not use filler rods in the
sample tube when applying correction for thermal transpiration.
Always use thermal transpiration when performing micropore analyses.
Refer to
CALCULATIONS
, page
C-1
for additional information on
thermal transpiration.
Inside diameter of
sample tube text box
Enabled when
Apply thermal transpiration correction
is selected. Enter
the inside diameter of the sample tube used in the analysis.
Selected Reports

list box
Select the checkbox to the left of the report names to include in the report.
Calculated pore width (w), pore radius (R) or pore diameter (D) for BJH
reports. Select
Options > Units
to specify default calculations.
Overlays button
Refer to
Multiple Sample Overlays
, page
3-35
.
Browse button
Close button
Edit button
Preview button
Replace button
Save button
Refer to
Common Fields and Buttons - File Menu Options
, page
5-1
.
Field or Button Description (continued)