Micromeritics Gemini VII 2390a, Operator'S Manual

Page: 64 / 426

Generating Reports Gemini VII
3-28 239-42828-01 - Dec 2012
3. Click
Report after analysis
to automatically generate reports when the analysis is complete. On
the
Report Settings
window, select the report destination. Click
OK
.
4. Click
Start
to start the analysis. A window displays data as they are collected. A short delay is
encountered before the port status changes from the Idle state at the bottom of the screen
When analysis is complete, remove the sample tube and store (or dispose) of the sample material as
applicable.
Generating Reports
Reports > Start Report > [file]
(or use the
F8
keyboard shortcut)
1. Select the report in the
Name
column. The selected report name appears in the
File name
text
box. To select more than one file, hold down the
Ctrl
key on the keyboard while selecting the
files. Click
Open
.
2. Select the report destination in the
Report Settings
window and click
OK
. Refer to
Printing
Files
, page
3-30
.
Use caution when removing the sample tube if using a hanging filler rod. The sample
tube O-ring or Dewar cover may snag the filler rod retaining ring. Loosen the snag
gently; excessive force may break the tip of the filler rod.