Micromeritics Gemini VII 2390a, Operator'S Manual

Page: 275 / 426

Gemini VII Appendix B
239-42828-01 - Nov 2013 B-9
2515- Warning: Changing the calibration information will affect the performance of
the instrument. Only qualified service personnel should do this. Do you wish to
proceed?
2516- Warning: Keeping a backup copy of the calibration data is recommended by
Micromeritics. Would you like to do so now?
2517- Canceling this dialog will reset the calibration state to what it was when this
dialog was first opened. Are you sure you want to cancel?
2520- No data points available for reporting.
2522- Invalid controller application file.
2532- The instrument contains a different software version. Do you want to reset it?
Cause: The process of performing a calibration operation was started.
Action: Calibration operations should only be done by or under the direction
of qualified service personnel.
Cause: A calibration operation was performed and a backup copy is
recommended.
Action: Perform a calibration
Save
operation.
Cause: The calibration has not been accepted.
Action: If the calibration operation was successful, press
Accept
.
Cause: The selected sample file does not have collected data and cannot be
used for reporting.
Action: Select a different sample file.
Cause: The application’s control file has been corrupted or deleted.
Action: Reinstall the analysis program.
Cause: The application has discovered a different version of software
operating in the analyzer.
Action: If there are no analyzers other than the Gemini connected to the
computer, select
Yes
and allow the updated software to load.