Micromeritics Gemini VII 2390a, Operator'S Manual, Page: 48 / 426

Defining Parameter Files Gemini VII
3-12 239-42828-01 - Dec 2012
Degas Conditions
Degas Conditions files contain degassing information for sample preparation.
1. Go to
File > Open > Degas Conditions
.
2. Enter a name in the
File name
text box. Click
Open
.
3. Click
OK
to create the file.
4. Enter a description in the
Description
text box.
5. Use the
Insert
button to enter up to five stages of degassing (soak temperature, ramp rate, and
soak time).
6. Click
Save
, then click
Close
. The file saves with a .DEG file extension.
Degassing is a required step in preparation for the analysis; however, this section is
only applicable if using the SmartPrep Degasser. This section contains degassing
instructions that will be sent to the SmartPrep Degasser equipment.