Micromeritics Gemini VII 2390a, Operator'S Manual, Page: 142 / 426

Report Options Files Gemini VII
5-32 239-42828-01 - Dec 2012
Pressure Range button
Click to enter minimum and maximum relative pressures.
If
Use calculation assignments
is
not selected
on the
Analysis
Conditions
window, all of the non-outlier points of the collected data
within the specified range are used for calculating the data for this report.
If
Use calculation assignments
is
selected
, collected data points assigned
to this report type are used.
Surface area

correction factor

text box
Enter the value to correct for surface areas that are not smooth. This brings
the values for BET surface area and micropore surface area into
accordance. For most samples, the default value of 1.000 is adequate.
t-Plot checkbox
Select to have a graphical representation of data generated.
•
X-axis -
the X-axis field shows the statistical thickness of the adsorbed
film.
•
Y-axis -
the Y-axis field shows the quantity of gas adsorbed.
Tabular Report
checkbox
Overlay Samples
checkbox
Refer to
BET/Langmuir Surface Area Report Options
, page
5-24
.
Cancel button
From / To text boxes
OK button
Table buttons
Refer to
Common Fields and Buttons - File Menu Options
, page
5-1 .
Field or Button Description (continued)