215184
34
Revision A
1008132
A
B
Figure 3.34: Lift Cylinder Attachment
18. Lift reel and remove pins from the endsheet and the
reel arm.
19. Align the reel lift cylinder mounting holes until they line up
with the lug on the endsheet and the hole in the reel arm.
20. Secure cylinder to endsheet and reel arm with pins
as shown.
•
Insert cotter pin into clevis pin (A) on
OUTBOARD
side
of reel arm.
•
Insert cotter pin into clevis pin (B) on
INBOARD
side of
endsheet.
1031685
A
B
A
Figure 3.35: Outboard Reel Arm Supports
21. Remove bolts (A) from reel arm support (B) at endsheet
and remove support. Repeat at other side.
22. Proceed to the next step for your equipment:
•
For double reel, proceed to
3.1.4 Attaching Center Support
•
For single reel, proceed to
3.1.5 Installing Tine Tubes: Six-Bat Reels, page 36
.