![background image](http://html.mh-extra.com/html/macdon/d1-series/d1-series_unloading-and-assembly-instructions_685658057.webp)
215184
33
Revision A
1020125
A
B
Figure 3.31: Double-Reel Center Arm Shipping
Support
8.
Double reel:
Remove six bolts (A) and two support
channels (B) on center reel arm to allow the center reel
arm to move. Retain bolts and support channels for use in
3.1.4 Attaching Center Support
1020584
A
B
C
C
Figure 3.32: Reel Arm Braces
9.
Double reel:
Lift reel to gain access to the center lift
cylinder.
10.
Double reel:
Remove shipping wire and banding from
center reel lift cylinder. Remove socket head bolt and nut
from cylinder rod.
11.
Double reel:
Lift reel so that hole in center lift cylinder rod
lines up with mounting hole in reel arm.
12.
Double reel:
Attach rod end of cylinder to reel arm with
socket head bolt and nut (A). Access hardware through
holes in reel arm braces (C).
13.
Double reel:
Torque bolt and nut (A) to 54
–
61 Nm
(40
–
45 lbf·ft).
14.
Double reel:
Remove pin at barrel end of cylinder.
15.
Double reel:
Adjust reel height so pin (B) can be installed at
barrel end of cylinder and mounting structure.
1008131
A
Figure 3.33: Outboard Reel Arm
16. Reposition sling (A) around the reel tube near the opposite
outboard reel arm.
17. Remove shipping wire and banding from the reel lift
cylinder.