![background image](http://html.mh-extra.com/html/macdon/d1-series/d1-series_unloading-and-assembly-instructions_685658411.webp)
215184
387
Revision A
1031524
A
Figure 9.186: Operator Controls
5.
When prompted, select OK button (A) to start the learning
procedure.
1031525
A
B
Figure 9.187: Multifunction Lever
6.
When prompted, raise front attachment with button (A) on
the multifunction lever.
7.
When prompted, lower front attachment with button (B)
on multifunction lever.
8.
Repeat as prompted until calibration is complete.
Setting Cut and Reel Height Preset
–
CLAAS 8000/7000 Series
WARNING
Clear the area of other persons, pets etc. Keep children away from machinery. Walk around the machine to be sure no
one is under, on, or close to it.
NOTE:
Changes may have been made to the combine controls or display since this document was published. Refer to the combine
operator
’
s manual for updates.